Urbackup
Способы установки urbackup client
1 способ :
On this page you will find step by step instructions to build, install and setup UrBackup on a Debian/Ubuntu GNU Linux system. 1.
Install the dependencies UrBackup needs: WxWidgets >= 2.9.0 On Debian/Ubuntu you can do that with apt or your favourite package manager:
apt install build-essential "g++" libwxgtk3.0-dev "libcrypto++-dev" libz-dev
2.
Download the UrBackup client source files and extract them via e.g.
wget https://hndl.urbackup.org/Client/2.5.24/urbackup-client-2.5.24.tar.gz tar xzf urbackup-client-2.5.24.tar.gz
3.
Build the UrBackup client and install it:
cd urbackup-client-2.5.24 ./configure make -j4 sudo make install
4.
Make sure that the UrBackup client backend runs correctly:
sudo urbackupclientbackend -v info
5.
Start the UrBackup client backend on startup by adding it e.g. to rc.local:
sudo chmod +x /etc/rc.local editor /etc/rc.local
Now add /usr/local/sbin/urbackupclientbackend -d before the exit 0. 6.
Start the UrBackup client frontend and setup your paths by executing
urbackupclientgui
and clicking on the tray icon and add paths. You can also do that on the server.
2 способ :
TF=$(mktemp) && wget "https://hndl.urbackup.org/Client/2.4.11/UrBackup%20Client%20Linux%202.4.11.sh" -O $TF && sudo sh $TF; rm -f $TF
/usr/local/bin/urbackupclientctl add-backupdir -x -f -d /home
Если systemctl status urbackupclientbackend.service выдаёт ошибку : ExecStart=/usr/local/sbin/urbackupclientbackend --config /etc/default/urbackupclient --no-consoletime (code=exited, status=2) То редактируем конфиг usr/local/var/urbackup/data/settings.cfg
Пример :
- Initial Settings. Changes will not be respected.
- 48692563-17e4-4ccb-a078-f14372fdbe20
internet_mode_enabled=true internet_server=192.168.11.130 internet_server_port=55415 internet_server_proxy= internet_authkey=wr616FSS8Y computername=009
